|
General:
|
|
The 687-52 Card Programmer will encode a 125kHz read/write card with a user defined ID number, which is EM H 4001/2, 4102 compatible. In addition the card programmer can be used to write up to 100 bits of user data to the card. The card programmer comes complete with RS-232 serial cable, a 12V dc power supply and Windows compatible PC software.
|
 |
Properties:
|
- Interface: RS-232 port at 19200 baud for connection to PC.
- Software Features:
- ID programmed into blocks 1 and 2 of read/write card and can be "locked" to prevent changes. Blocks 3-7 of read/write card available for 100 bits of user data (format proprietary).
- ID Programming of blank read/write cards for use as read only cards.
- Duplication of read only cards.
- Programming ID number and configuration (block 0) of blank read/write cards for use in read/write systems.
- Programming unique "signature" into cards to prevent duplicate cards working on high security readers.
- Preset user data areas of a read/write card for use in read/write systems.
|
Technical Data:
|
|
• Frequency:
|
125 kHz
|
|
• Data Format:
|
64 bit Manchester Code
|
|
• Interface:
|
RS232 port at 19200 baud baud for connection to PC.
|
|
• Dimensions:
|
154 x 83x 38mm
|
|
• Operating Temperature:
|
0 - +50°C, non-condensing
|
|
• Operating Voltage:
|
12V dc. Current consumption is 80 mA typical, Power Supply included
|
|
• Transponder Chip:
|
Read/write tags supported:
TEMIC e5551/4/5/7 series, Sokymat Q5, and equivalent devices. Programmed 40 bit ID number format is EM H4001/2, 4102 compatible: 64 bits (includes parity), ASK, Manchester encoding, RF/64 bit rate
|
|
|
Data sheet
|
|
